LIên hệ đặt hàng

0968425418

Cảm biến nhiệt độ- độ ẩm gắn phòng DWYER SERIES RHP-E/N

Liên hệ có giá tốt nhất

Tính năng sản phẩm

The Series RHP-E/N Wall Mount Humidity/Temperature/Dew Point Transmitters
are the most versatile room transmitter on the market. The stylish housing is well
vented to provide air flow across the sensor to improve measurement accuracy. The
humidity and the dew point are measured using a capacitive polymer sensor. The
humidity and dew point can have either a current or voltage output, while the optional
temperature output can be a current, voltage, RTD or thermistor. For models with
current or voltage for the temperature output, the temperature range is field selectable.
BENEFITS/FEATURES
• Reduced installation cost with combined humidity/dew point and temperature
sensing
• Wide application environments from a large selection of temperature sensors and
2% and 3% accuracies
• Reduced inventory with field selectable output
APPLICATIONS
• Air economizers
• Room comfort monitoring
• Greenhouse monitoring

AQ-RHP-E-N-Instruction-Manual.pdf RHP-E_N_3-catalogue-page.pdf DS_RHP_EN_Rev4-product-data-sheet.pdf

LIên hệ đặt hàng

0968425418

Thông tin kỹ thuật

Relative Humidity Range: 0 to 100% RH.
Temperature Range: -40 to 140°F (-40 to 60°C) for thermistor and RTD sensors.
-20 to 140°F (-28.9 to 60°C) for solid state band gap temperature sensors.
Dew Point Temperature Range: -20 to 140°F (-28.9 to 60°C); 0 to 100°F (-17.8
to 37.8°C); 40 to 90°F (4.4 to 32.3°C); -4 to 140°F (-20 to 60°C) field-selectable
ranges.
Accuracy: RH: Model RHP-2XXX ±2% 10 to 90% RH @ 25°C; Model RHP3XXX ±3% 20 to 80% RH @ 25°C; Model RHP-5XXX ±5% 20 to 80% RH @
25°C; Thermistor temperature sensor: ±0.36°F @ 77°F (±0.2°C @ 25°C); RTD
temperature sensor: DIN Class B; ±0.54°F @ 32°F (±0.3°C @ 0°C); Solid state
band gap temperature sensor: ±0.9°F @ 77°F (±0.5°C @ 25°C).
Hysteresis: ±0.8%.
Repeatability: ±0.1% typical.
Temperature Limits: Operating: -40 to 140°F (-40 to 60°C); Storage: -40 to 176°F
(-40 to 80°C).
Compensated Temperature Range: -4 to 140°F (-20 to 60°C).
Power Requirements: 4-20 mA loop powered outputs: 10-35 VDC; 0-5/10V
outputs: 15-35 VDC or 15-29 VAC.
Output Signals: 4-20 mA loop powered outputs: 4-20 mA, 2 channels for humidity/
solid state temperature sensor models (loop powered on RH). Switch selectable
RH/dew point. Switch selectable normal or reverse output; 0-5/10V outputs: 5
mA max., 2 channels for humidity/solid state temperature sensor models. Switch
selectable 0-10 V/2-10 V or 0-5 V/1-5 V output. Switch selectable RH/dew point.
Switch selectable normal or reverse output.
Solid State Band Gap Temperature Sensor Output Ranges: Switch selectable,
-20 to 140°F (-28.9 to 60°C); 0 to 100°F (-17.8 to 37.8°C); 40 to 90°F (4.4 to
32.3°C); -4 to 140°F (-20 to 60°C).
Response Time: 8 s.
Electrical Connections: Screw terminal block.
Drift: <0.25% RH/year.
RH Sensor: Capacitance polymer.
Enclosure Material: Polycarbonate.
Enclosure Rating: IP20.
Display: Optional LCD; Switch selectable %RH or dew point, °F/°C.
Display Resolution: RH: 1%; Temperature: 0.1°F (0.1°C); Dew point: 1°F (1°C).
Weight: 4.4 oz (125 g).
Compliance: CE