LIên hệ đặt hàng


Công tắc chênh áp suất gió Dwyer Model: ADPS / EDPS


Tính năng sản phẩm

The Series ADPS/EDPS HVAC Differential Pressure Switches are
designed for pressure, vacuum, and differential pressures. The dual
scaled adjustment knob in inches water column and pascals allows
changes to the switching pressure to be made without a pressure gage.
The ADPS/EDPS are available with settings from 0.08 in w.c. (20 Pa) up
to 20 in w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make
the series ADPS ideal for use with air and other noncombustible gases.
Series EDPS models meet UL508 and are constructed of plenum rated
plastics. The compact size, adjustment knob and low cost make the
ADPS/EDPS the perfect choice for HVAC applications

• Air filter and ventilator monitoring
• Industrial cooling circuits
• Fire-protection damper control
• Ventilation duct monitoring
• Fan heater overheating protection
• Heat exchanger frost protection





E_80_ADPS.pdf E_80_EDPS.pdf DS_ADPS_EDPS.pdf

LIên hệ đặt hàng


Thông tin kỹ thuật

Service: Air and non-combustible, compatible gases.
Wetted Materials ADPS: Diaphragm material: Silicone; Housing material: POM; Switch body: PA 6.6; Cover: Polystyrene; EDPS:
Diaphragm material: Silicone; Housing material: Switch body: PA 6.6; Cover: Polystyrene; Materials UL 94 V-0 rated.
Temperature Limits Process and ambient temperature from -4 to 185°F (-20 to 85°C).
Storage -40 to 185°F (-40 to 85°C).
Pressure Limits Max. operating pressure: 40 in w.c. (10 kPa) for all pressure ranges.
Switch Type Single-pole double-throw (SPDT).
Electrical Rating Max. 1.5 A res./0.4 A ind./250 VAC, 50/60 Hz; Max. switching rate: 6 cycles/min.
Electrical Connections Push-on screw terminals. M20x1.5 with cable strain relief or optional 1/2˝ NPT.
Process Connections 5/16˝ (7.94 mm) outside diameter tubing, 1/4˝ (6.0 mm) inside diameter tubing.
Enclosure Rating NEMA 13 (IP54).
Mounting Orientation Vertically, with pressure connections pointing downwards.
Mechanical Working Life Over 10^6 switching operations.
Weight 4.4 oz (125 g).
Compliance ETL approved to UL508 and CSA C22.2#14 (EDPS only).